Well, so, um the Second Part did not happen. I was meaning to swap the thermostat in the evening when it is much cooler after the brief downpour. Alas, the pair of 10mm bolts were so tight, I was worried that my small Pro's Kit ratchet might break if I keep forcing the turn.
So, if my ratchet broke halfway, I might not be able to put the whole thing back again. So, this means, I might need to enlist
the help of the Mechanics where I work. I was so into making a video
of both thermostats 'moving' when I pour hot and cold water. You know, Science.
 |
| The water temperature on the right usually points to about 25%, but now, its about 50%. This means and I hope is the problem with the thermostat. |
 |
| This is one of the two bolts. Its a tight squeeze to get in there but the main problem is to apply enough torque to get the bolt moving. |
 |
| And yes, Folks. This is the thermistor. |
