This is the replica of that Lightsaber. Unfortunately, there is
a dent at the emitter, no thanks to Shahna San this morning.
Note that the grip is nicely done and this is a very
important fact. I will tell you why, later
And note the activation trigger is free of dust. You do not
want your Lightsaber to turn off when everyone is watching
you fight. No, Seesemu, I did not lose my legs that way
And the D-rings must be secure or else you will lose
your Lightsaber when you do a Force-jump
And here, the recharging port has been modified using
Xelonian technology. You can re-charge your saber in
seconds from any data port if there are no other power
ports nearby
One last thing, make sure your power indicators are secured
so that they do not move about much
Finally, this is how it looked like when polished nicely
Now, lets look at the other Lightsaber
Pay attention, Urleu! I have told you many times not to
set your lightsaber too bright. You might even melt the
emitters. But here, this is no mere heat that damaged
the emitters. Oh, alright, you can look into it. The heat
has warped the lens anyway
Now, one thing I must remind you. If you have sweaty palms,
please wear a pair of gloves. The sweat from your palms can
really distract you in the heat of the battle and might even
make get you lose your hand
No, I do not know what happened to the power indicator
when we found it. Maybe it was already broken
And this is proof how the tough metal Graflexium fares
After so many battles, there is not even a scratch on it
And once again,
Yes, you are right. The end of this Lightsaber also uses hard
metal called Milleniaum but this is from the Armitage Planet
Once more, before I end the class, lets look at the two
Lightsabers.
Nice, isn't it?
No, don't touch the switch, now.
And no, you cannot take this back for your Mother to
hit the wamprats
The Lightsaber is the Jedi Knights most potent weapon
and they must be well taken care off.
So, my Padawans, do not use your Lightsabers too much.
Even the heat from the cystals can melt the handle over
the years. Just see how long the used Lightsaber is when
you compare it to the original.
a dent at the emitter, no thanks to Shahna San this morning.
Note that the grip is nicely done and this is a very
important fact. I will tell you why, later
And note the activation trigger is free of dust. You do not
want your Lightsaber to turn off when everyone is watching
you fight. No, Seesemu, I did not lose my legs that way
And the D-rings must be secure or else you will lose
your Lightsaber when you do a Force-jump
And here, the recharging port has been modified using
Xelonian technology. You can re-charge your saber in
seconds from any data port if there are no other power
ports nearby
One last thing, make sure your power indicators are secured
so that they do not move about much
Finally, this is how it looked like when polished nicely
Now, lets look at the other Lightsaber
Pay attention, Urleu! I have told you many times not to
set your lightsaber too bright. You might even melt the
emitters. But here, this is no mere heat that damaged
the emitters. Oh, alright, you can look into it. The heat
has warped the lens anyway
Now, one thing I must remind you. If you have sweaty palms,
please wear a pair of gloves. The sweat from your palms can
really distract you in the heat of the battle and might even
make get you lose your hand
No, I do not know what happened to the power indicator
when we found it. Maybe it was already broken
And this is proof how the tough metal Graflexium fares
After so many battles, there is not even a scratch on it
And once again,
Yes, you are right. The end of this Lightsaber also uses hard
metal called Milleniaum but this is from the Armitage Planet
Once more, before I end the class, lets look at the two
Lightsabers.
Nice, isn't it?
No, don't touch the switch, now.
And no, you cannot take this back for your Mother to
hit the wamprats
The Lightsaber is the Jedi Knights most potent weapon
and they must be well taken care off.
So, my Padawans, do not use your Lightsabers too much.
Even the heat from the cystals can melt the handle over
the years. Just see how long the used Lightsaber is when
you compare it to the original.
2 comments:
Nice little 'tutorial' you have there my friend.
So this is what you do with stuff that I put in your temporary care...ha ha ha.
I'm waiting to see what you'll come up with after you collect the other items this Saturday :P
Well, ha ha. Just for fun le. Anyway, I have collected the other Lightsaber and the 2 Phaser rigles and the NEFR gun from Richard. He can't located the scope as its stored somewhere else. :-O
I am worried about my Lightsaber and Tricorder now
Post a Comment