Mr. Colour's Gun Chrome

lts amazing what a little airbrushing can do. I was at ICW and asked rayloke to help me get a  metallic tone which is neither too bright (shiny) nor too dark. So, he recommended Mr. Colour's Gun Chrome. I was about to ask more on the Alclad and the those Super Metallic series but I think they're too bright in the end.

I was quite happy with the Humbrol acrylic silver although it was too bright (which I would darkened it with a coat of black) and by accident, my thinner damp finger spoiled the surface when I touched it. The thinner cruelly took out the silver.

And this pushed me more to thinner based paints and away from acrylics. I was told they have more 'persistent' coating and gives a better effect. Being somewhat of a dumbass, I do not understand it but I do feel that its better than acrylics, even Tamiya's. But I'll still use them for washes though.

This is nice because its actually mixed with some black

I was so excited with it, I forgot to prime the part but then again, if I did, the grey primer might make it brighter.

The girls's new Train

Grandpa has helped to clear the 38 year old swing swing and all of a sudden, the girls were very busy. What were they doing, I had no idea but eventually...

Presenting the new refurbished swing!

Just so that you know...

It even has an on-board entertainment system...

More speaking, please!

These came in the Post today. And I might say, its a bit too late as they're supposed to be used for a few projects before September. Then again, its not their fault but mine because I should have given some leeway for shipping times.

It was pure luck that these were being sold in a set of four at a very ridiculous prices!

At first, I thought it was the **censored** but I was wrong

These are the 2.1Watt mini rechargeable speakers which are very loud. I once tested it in a busy restaurant and the sound was clear and well, loud. It has a USB cable for charging plus a key-ring. But I do not like the black rubber-like coating since from experience, they will become sticky and gooey after some time.

On the left is my RM39.00 speaker while the right is more than half that price. I am not too particular about the pros and cons of these speakers since I am going to take them apart anyway. What I needed was the speaker and its amplifier. The charging unit plus the battery will be thrown away.

Little Fairies

Playtime for the girls. Its a great idea for them to run riot outside the house before dinner and well, homework. Tends to let go of the stress developed and also, afternoon sleepiness.

We have successfully minimised their Computer and TV access so, there is no excuse not to run like a screaming headless chicken all over the place...

Unfortunately, NERF guns are out.

Just for today, they're Fairies, not Angels, mind you.

The NERF 35-Drum Mag

I now have ANOTHER Nerf 35-drum Mag. Why, I am not sure but I just like the design. From different angles, it just looks like any Sci-Fi plasma container, a rotating thingy with lights and so on. 

But to store NERF darts? No way, Hose. It's bulky. I mean, its a great idea as far as carrying loads of ammo is concerned but its very bulky. One lad complained that they have problems when it comes to shooting from a barrier. But he won't sell me his, though. Still, on a Raider, it was the nest solution as you need to fire away lots of ammo within the shortest time (a method called slam-firing, which is only possible with this model and now, also the Elite Rampage and Pyragons)

This is how the drum looks when inserted correctly in your NERF blaster. It should be facing you so you can tell how much darts are left in the drum.

This is how the drum looks when your target sees it. They cannot see the amount of dart left and it should be that way.

Tried it on the Longshot. Bulky.

Tried it on the Longstrike. Bulky

Tried it on the Recon. OMG bulky.

Tried it on the Barricase. Oops... Barrricade's not ready yet.

Vege treasure in Puchong

I cannot resist petai. Eventhough my Wife has warned me that its not good for the Gout. But... but... when I see it, I just wanted some.

Just a little bit. Yeah, there goes my diet too.

And so, it was at this corner lot, at the second traffic light AFTER you turn in from the main road and before the IOI Business Centre. I forgot the name but its banners were plastered all over the place.

Dad wanted to try this new shop just across the workshop in Puchong. It turned out to be a Vegetarian foodstall. And so, later, I went out to buy some friend chickens for Dad to 'balance' his Lunch.

You can go to Google.map and type in the following coordinate:
3.041151,101.625389
and hopefully, it will give the same result as above.

Kaelynn's Friend

While waiting for Kristine's school to be over, Kaelynn spotted her classmate. And so, being the alert and smart girl, she told me about her and then, asked my permission if she could go over and speak to her. I said, 'OK' and also gave her two Ringgit for her to buy some ice-creams for herself and her friend. Then she came back and asked if she could bring her friend over to the ice-cream man as her friend could not decide on the flavours.

I said OK, since the school is not over yet and there were no traffic.

Kaelynn helped hr firend to choose the flavours

Being the ever careful Host, Kaelynn also made sure her friend did not soil her uniform with the melting ice-cream.

Once they have both finished their ice-creams, Kaelynn also helped disposed her friend's empty ice-cream stick. Note that this is not a camera trick but Kaelynn is very much bigger than her friend.

One thing is, I am very sure Kaelynn was very very happy because she could take her friendship up by a few levels. She is getting a bit popular in her class now.

Sunday Test

We had to take Kristine to a school today because she accumulated a lot of demerit points. In other words, every time she does not do her homework, or was late in handing them in, various infractions in the classrooms and also not partaking in any of the school's activites, these will earn her demerit points.

These point will accumulate until usually before the PMR or UPSR sessions and depending on the severity of the points, they will have to undergo some tests to determine if they're still fit or eligible for next year's class or repeat the same whole year again.

And so, here she is, in one of the tests, to determine her Chinese comprehension

OK, if you believe that story, good for you and oh, you DO remember you owed me some money 10 years back, right?

This is the CCCC class where she had to go for a Chinese comprehension test. This test are for those students who came from an English or non-Chinese speaking background (I am offended because I am the real cause here, the Daddy Banana). Its not actually compulsory but I suppose, it would make her life in the school easeir...

The parcel from Germany

After the two events this morning (NERF & 'Horse vs Bull' GB), I discovered that there was a package from Germany waiting for me at home.

This is a very big package. I would not blame you if you have asked if I ordered a Pizza from Germany.

My very one 'complete' Preiser figures. They are expensive when compared to 'normal' model kit figures. But hey, with eBay, you can find them cheaper. And moreover, this is the first time I have seen modern US Army in 1/72 scale.

You get two trees in the box and yes, you can sort of combine to make your own figures.

Just look at the figure on the right. Its a Female, right?
But if you scroll back up to the box package, 'she' was painted as a Male.
Its the third figure from the left on the top row.

Different manufacturers have different scale, which I do not mind as long as the margin or error is minimal. Here, it is being compared with a Revell 1/72 (left)

So, now I have some US Army, I wonder if i can convert them into German Paratroopers for the C-160 Transall ....

What? You did not know I was building a plane? If you need to know, its here:

SFTPMS Forum, and/or the ARC Forum. They're both more or less the same unless you want to read the stories 100%.

Horse vs Bull 2012 @ICW

And so, right after my Airbrushing session, it was time for me to leave. But not before I managed to snap a few photos and hung around a bit for the SFTPMS 'Horse vs Bull' Group Build. This event was headed by Vince Yong (aka bombervince) where the main aim of the Group Build was to showcase different builds of Ferraris (Horse) and Lamborghinis (Bull).

Some last minute touch-ups...

Most of the Horses are here...

Whoa... the Aoshima Lamborghini Aventador!

I wanted to participate on this GB but because the only Aventador available at that time was the 1:10 radio controlled car, I could not enter. I mean, I can display it but it would not mean anything since its classified as a 'toy'. Then again, I did not realise I would have an Airbrush so soon either since I was planning on hair-brushing the models and then use sand paper on them.

Yeah, I had plans for it; from the lighting to the engine sound and the animated rear spoilers. Oh well, next time, then.

More blowing at ICW

This is the second time I am here and its been a few days since I last struggled with the Airbrush. (My finger is OK now, thank you).

Like all forms of Art, I realised that Airbrushing is no exception. You cannot just go in gung-ho and/or use brute force too.

I have airbrushed the surfacer in the cockpit. You won't see any difference because the model kit's plastic is grey. And rayloke was right that you need to use the light's to see where you have airbrushed the surfacer. It tends to leave a sheen when its drying.

The manual says to mix 80% Olive drab with 20% white. So, I just got a some aircraft green and mixed a drop of dark green instead. Hey, whatever colours available, I just get.

Later on, there was Olive Drab and White at ICW... shucks.

If I read the the instruction carefully, it said to shake and stir for 45 seconds which I did and this is what happened when I opened the paint for the first time.

Although the graphical instructions on the container said its can be used on an airbrush, I added some water just in case. Even with maximum pressure, its still very hard to push the paint out. Maybe I should add more water...

 

Well, the final result is brilliant. A smooth silvery surface. Alas, I am not looking for this result, so I forced myself to be disappointed.

 

 

22092012 NERF @SS2

I was late (again) this morning for the NERF Damansara session. This time, it was at SS2 and the turnout was very good.

Natalie (right) bought two pouches from Daiso which serves as her new Maverick holsters.

A shy new boy came with his Mom after hearing about us on Facebook. We let him try out one of the NERF blaster instead of waiting for him to go home and get his Recon. Yeah, we also let him play one of the games (w/o the parental consent form. Oh-oh). But he could not stay long since he has to study for his exams.

We were discussing on the shotgun grip for the Longshot and with some huge PVC pipes, they have done theirs. Me? I am still busy with the SFTPMS Group Build so this will have to wait. Also, if I want to sell it now, I do not have the capital to start the R&D and casting.

The HDD

Man, this is taking me days. What we have here is my former Toshiba Notebook 3.5" hard disk and it was plugged to some USB-to-IDE adaptor. Years ago, when I plugged it onto my Windows XP Notebook, everything was hunky-dory. But now, after digging it up from storage and transferred 45GB of data on another Windows 7 system , it became unreliable.

I am not sure if the USB connection was the cause and I really hope its not since the cable cannot be unplugged or replaced And I also hope that it was not the Hard disk either (because I have no money nor the intention to get a 32GB flash drive just to transfer stuff). But then, I am happy as I got most of the important Data out which I thought was lost but was in there for a very long time.

Alas, for those waiting to access the Zarjaz issues, the Thrillsuckers got to it first. And it took me DAYS to transfer from the HDD to the NAS via Wifi. (NO I don't have a long Network cable, thank you)

The penny has dropped

This was a conversation I had with Bruce regarding my first airbrushing experience on Facebook. Then Kenny chipped in and LOL-ing.

Its more than six days which I realised that our conversation has another 'meaning'

1:144 Revell Trinity House Lightship

Strung out and hung, all on a whim.

I nearly bought this today. On a whim. No. OK, take it as it is - impulsive.

Yes, I nearly bought this ship today just because I know it was sitting on the shelf for years. And I know that the moment I notice it, I will hype myself up that this ship is important and once I want to get it, its gone. And then I will search all over the Internet to get it as a 'revenge' to myself. And the kicker?

"It just a simple model, spray paint it red and add some lighting, it'll be perfect"

Riiiiiiight.

And all this when I had less than RM15.00 in my wallet.

Let's look at this model in more detail.

Its a red ship that has no engines, which serves as a floating lighthouse for the threacherous waters off Dover and Deal which is famous for shipwrecks and lost lives. It broke from its anchors in 1954 during a strong 80mph wind. The only survivor, hung on for eight hours before being rescued.

Based on the detailed fact above, how can anyone slap in some paint, put on some lighting and screw up the model's base and be happy with it? Yes, although its just a model, the more you search it up on Google, the more you still start to gain respect for this humble ship, 'The Trinity Light Vessel no. 90'

This model was originally from FROG in the 60's, then taken over by Russian Eastern Express and eventually, by Revell Germany. Its now out of production.

Perhaps, I shall get it, not because I really really want to light it up but more as a futile and some lame way to immortalise this ship and its noble task.

[Update:  27092012]
I got it! I got it! I got it! I got it! I got it! I got it! I got it! I got it! I got it! I got it! I got it! I got it!

Blowjob at ICW

This summary is not available. Please click here to view the post.

You must pay to PROMOTE

"Tell friends this post is important". 

Just recently, I noticed a new link, 'PROMOTE' right after I posted a, well..., post. Being the ever curious fatty, I decided to click on it and then, a window popped up.

You can now 'promote' your post or posts that you have shared in exchange for a small sum. What it does is that your post will be featured in your friend's news feed and are labeled as sponsored. How long you 'promotion' lasts, I am not sure but the attractive thing is, your post can be anything, be it text, video or even photos. However, you cannot promote Group posts or Private messages. And other questions. For more information, you can get it from this FAQ.


Before you start to complain and grip about FB making money and taking advantages, etc., you have to remember that this is the norm when it comes to real world media.


And here's the great thing, its a wonderful tool for Businesses. However, for individuals, its not so hot. Then again, its hard for me to see any potential since I am still not familiar with FB.

The 6-piece potato

This is a classic.

While I was helping my Wife cook dinner as fast as she could, she pointed to some potatoes and gave me the following instructions:
1. Peel the potatoes.
2. Cut them in half, and
3. Then cut them further so that I get six pieces out from each potato.

And I did that. Exactly. Except that my mind has some problem with step #3. Because we're rushing to cook the dinner, I had to go from Engineering mode to normal layman mode so that I can understand her instructions better. Take it from me as I have experienced this before and its the difference between the bed and the cold hard floor

Unfortunately, its hard to do that because my brain was still stuck with a design problem and so, while doing the change, my mind literally froze.

And in computer-speak, my brain 'hang'-ed. All I could think was, how to cut them into 120º pie sections as there were no protractors to measure the angles...

And so, the first two potatoes (left) had funny shapes...
My Wife and I kept staring at it before I realised what had happened.

Luckily... luckily she made me cut the potato in half so I did not have to worry about in 3D...