20251231 That Pinky Fan Pt. 02

 So, in just less than three days, the replacement battery had arrived. And I am not happy.

 In what was a simple replacement job, it almost went to FUBAR but I managed to steer it back to SNAFU. Oh, the former acronym is the worst situation and here are some more colourful ones.

 

The Battery Change

 The job at hand is quite simple. Get a new battery, match the connectors to the PCB and plug it in. 

The new battery (2200mAh) has a 2.54" pitch connector which I would have to somehow convert it to the Fan's 2.0". The quickest solution would be to cut off the wires of the original battery and solder it to the new one.

The original batter has a BMS circuit which I could not remove and solder to the new one as I do not have a spot welder. Using a slow 30W soldering iron is madness. It's like making an omelette with a candle.

The SNAFU

 So, this is the part where everything went wrong. After plugging the new battery in, it does not charge reliably. Suddenly, all the years of using this fan brought back memories. Especially the memories of the USB connector being faulty...

 In other words, the faulty battery might not have been faulty at all until I made it so (by removing its cover and snipping its cables away).

 

 

So after wiggling the USB connector, it was confirmed to be loose. And with some dabs of solder, the circuit is charging.

 

The FUBAR

 OK, so it didn't fully go to that stage yet except for my Wallet which I FUBAR-ed it. Once I am back from work, I would have to perform a Supervised Charging Test and then, we'll see.

 

 

 

20251231 Dentists

 I was just wondering...

 

If an Artist does Art, and then a Dentist...

20251227 That Pinky Fan Pt. 01

The Pinky Fan 

 While I was at the back of the Kitchen, I saw the Pink Fan again. Alas, this time, it was destined to be thrown away as my Wife stated that it could not be used for long after every charge. This fan has been at out girl's study table for quite some time. I never thought I would ever see it again after our move as we did a lot to lighten our trips.

 

(Almost) Everyone had one

 I was toying with the idea of having one of those fans which now comes in a very compact form. If you looked at it, it was designed to be like a small jet or, a high speed fan. I was thinking of, you know, having one handy if we ever did some BBQ outside the house. Alas, there is a very high possibility that it would not be happening so soon. In the meantime, everyone else in the Office was using it to blow onto their faces. This is quite awkward since we're in an Air-conditioned environment.

 

 Can this be repaired?

 I am very sure that this can be repaired. When my Wife told me the reason why it has to be thrown away, I know that it has something to do with the batteries. With today's products (and Vapes), I know I'd be looking at lithium-ions or, lithium polymers. In most cases, it was always the batteries as most products needs them to work and in the most economical way.

 Looking at the Fan, it is either glued on, or, snaps together with hidden clips. This method does away with metal screws and which I surmised, reduces manufacturing costs. In the end, the Consumer would get a year or two of service out of it before it 'breaks' down.

 

 In the meantime

  So I am still browsing at my local B2C Platform to get the best deal and I am very sure that the price could either be half of the Fan's original price or slightly more.

The lonely little pink fan which sat on the pile of debris, awaiting its fate with the Dump.

The simplicity of this design is that everything is either glued on or, it has hidden clips. The design of the fan is quite simple. Connect a DC motor to a USB Li-Ion charger cum motor speed controller and you're all set.

 

 

So, replacing the battery is just a simple matter of unplugging the old one and plugging a new one in. Actually, it is not that simple because, there is no standard in ensuring the connectors are following which side is the positive and which is, the negative. Therefore, when I receive the battery, I'll bet there would be some re-wiring.

 

 

20251219 Who is Frank Miller and why is there a Ronin sequel?

 During my Teens, when I was into Comics, there were a few Artists which I loved. Names such as Cam Kennedy (2000Ad: Judge Dredd, Rogue Trooper), the late Carlos Ezquerra (2000AD: Judge Dredd, Strontium Dog & The Stainless Steel Rat), Arthur Adams (Longshot), Todd McFarlane (SPider-Man & SPawn), Matsumune Shirow (Appleseed, Ghost in the Shell & Intron Depot), Don Martin (MAD), Al Jafee (MAD), Sergio Aragones (MAD & Groo the Wanderer), Peter Kuper (MAD's Spy vs SPY), Barry Windsor-Smith (Alpha FLight #38 Uncanny X-Men - Wounded Wolf) and Marc Hempel (Gregory)

Frank Miller? At that time, I had no ideo who he was. It was not until I came across a simple bookshop that was selling some very old comics. Ronin was one of the better ones because of its exciting and sometimes in your face black border designs. This got me going and searching for more of the Ronin series but to no avail. I mean, for a kid living in the 80's, the concept of specialised Comics Shop or information on a particular Artist was unthinkable. So, reading and getting the incopmlete Ronin series meant that I have no understanding of the story. Plus, the art was... unique. At that point in time, I felt like as if I was holding the Mona Lisa in my hands but I have no idea about its significance.

Decades later, the Ronin chapters turned into a Collection. I was saving up for it but due to work and other stuff in Life (like The Dark Knight, Hard Boiled), that goal was quickly forgotten. The 90's Internet allowed me to access more of his work, namely The Dark Knight, The Dark Knight Returns, Hard-Boiled, Robocop vs Terminator and Sin City. Although I did not digest the latter, the Movie was still... weird. The only time I got interested with a Comic was due to its art but for Frank Miller, it was different. His art style was... unique. It was just enough to convey the Story and it was his very Stories that got me hooked. Confused yet hungry for more, but hooked. So for Ronin, I had to refer to the Wikipedia to understand what it was all about, and then I realised, Sci-Fi with D&D or Fantasy just does not work for me.

And, ComplexAd7272 summed it best.

Anyway, Frank Miller is now 'sober' and since October 2024 has produced the sequel to Ronin, called Ronin Rising and another title called, Pandora.

20251213 The RM50 Irony

 Usually, when we go out together, most of us would look for some shady parking spots which even the Authorities would not bother. In fact, most of us Malaysians have this bad parking habit and now, decades later, it has gotten even worse. All that changed for me when in the late 80's, an Engineer shared a mind-blowing concept with me. "Don't think of the Parking fee as a burden but more as a shield" or something like that. What he meant was, the RM1.00 is an Insurance or guarantee that you would not be fined. And so, once you accepted that paradigm shift, paying for parking is not that bad. Since we're on a 1 hour lunch break, finding parking fast is very important and so, paying for a proper parking spot is standard. Well, OK, unless the fee is RM6.00 and above which is not my kind of tea.

 And so, I've been drilling this to my colleagues and anyone who would listen to an old Uncle like me.

 Coming back to the irony of the day, since I offered to drive my colleagues to Lunch (we kinda voluntarily rotate our cars), I made sure to share the parking concept with them. I mean, there is nothing else to do while sitting inside a car where it is blowing hot A/C gasses at you, and on a busy street too. Before I could start, I noticed a vacant parking slot across us which, surprisingly, no one has taken it for the past 6 seconds. And so, after swooping in and parking my car, we went on our merry way while I mentally and humbly congratulated on my great luck. Lunch was just an ordinary affair where I got to have my favourite Jawa Mee and we bumped into an ex-colleague who had finally escaped the grind.

The Irony?

 Well, that was me, getting fined, for not paying for the parking while telling others to pay for their parking. I guess the excitement of getting that parking made me forget. These are the spots where people just parked and did not bother about paying. I guess the change of guards has brought on new changes.
 

 

 

 

Yeah, the fine would cost me about a minimum of 4 days of Lunch which means, I better start making my own Lunch. Maybe its a sign for me to do that as most of the Lunches really made me gain weight...

 

20251130 Art Side of the Force @Jaya One

The Sunday Drive

Out on a whim, my eldest Daughter and I decided to have a slow drive to Jaya One, just to let her have a small glimpse of my World. There was a Star Wars event happening and I wanted to let her see what kind of mischief I used to enjoy when I was so much younger. And also, I wanted to get some 3D printed 1/35 scale motorbikes (which I saw on Facebook a day earlier).

I highlighted the numerous 'Historical' places that had taken place on our route and stuff like that. I felt that although the information was overwhelming, she kinda took it well, maybe out of politeness. She might know the route yet but I tried to link them with the places she had entered just to make sure she does not get 'lost'. This happened to me a few times when I was a kid since my Parents drove us around. It was only when I started to drive that my mind more or less linked the places and routes together, giving me a rudimentary sense of location.

But first thing first...

We needed to have something to eat, never mind if it was already four in the afternoon. Call it a late Lunch, a pre-Dinner meal or even Lunner if you want but we're damn hungry. We bumped into a friend of mine, Mr. Chan and after a brief chit-chat, he politely left us alone to enjoy our meal.

To be honest, really entering back to Jaya One after so many years, there was a lot of changes and as expected, a lot of emptiness. To me, it was as if the place had picked up and moved on, while discarding the dead baggage while at the same time, tried to be as normal as possible. But we can see that the foot traffic is not that healthy, even if I compared it years ago.

A fulfilling meal at GoduBab Cafe. Since its a Sunday and all, the bill of RM59.35 sounds reasonable. We did enjoy the meal and she did ask a lot of questions about Family ties, Sci-Fi, and... stuff.  From the conversation, I had a brief glimpse or window of where her interests lies in Sci-Fi. Still, it is not my nature to force her into my World.

 

 The Wonderful disappointment that is... Star Wars.

 Imagine visiting one of your on and off favourite Uncles. He is sitting in one of the dimly lit corners. Sometimes he has gifts for you which can be very exciting and sometime, it is just inconsequential. Most of the time, it is the same stuff repackaged over and over again. You still want to see him, hoping that one of his gifts is a hit and over time, as you moved on, it became meh and you're actually embarrassed to introduce him to your kids. The outcome can be either embarrassing, irrelevant or just plain boring. 

I dreaded the choice of bringing my eldest to the point of really questioning my move. Like any excited parent, I would really want to share my Interest with my children and hoped that they too, would be interested. In the last decade, I have seen many FB friends who did that and it does not last. More like fatique setting in and they did it out of politeness while being forced. I do not want that. She did ask what was the last or rather, latest Star Wars movie to which I replied was, "The Rise of Skywalker", a film I wanted to bring them to watch before the Pandemic struck and before all that indigestable woke shit came out.

Seeing that the whole Event was nothing more than booths being set up by some people I knew and Cosplayers walking around with bathrobes and lighted stick, I knew she was bored. Even other areas of the building had more foot traffic. After a last detour to catch up on a friend who has a model kit shop there, it was time to leave as she needs to get a memory card; one of the somethings that Jaya One does not have.

 

It felt as if we were walking into a barren display area or some kind of a second-hand bazaar. If there ware some decorations such as fabric cave walls, this might work. Seeing some of my friends manning the booths there, I did not want to stop by and chat since I know my kid is not really interested.

 

The only consolation is that I was able to get a RM5.00 3D printed figure since the 1/35 scale bikes were all sold out.

 

Sabertrio is a home-grown Company which does a lot of beautiful lightsabers. Seeing them on display really made me wished I had one and hoping that the numbers on the price tag was in Japanese yen...

 

 

 

 

 

20251121 The Gig Worker

The New Disruption

 Imagine working in a place where you can do whatever you like, however you like and whenever you like (OK, this last part is important later), just as long as you hit the target, everyone is happy. And best of all, the no stress target is set by you. Plus, you get to 'work' everyday, as long as you feel like it and the more hours you put in, the more you get out of it, even if the goalpost moves every now and then. There are no office politics, no one stealing your food/ seat/ etc and more importantly no time consuming, useless meetings. And this is an exciting Job where you are at the forefront of this disruptive movement.

 But like all good things nowadays, there is a downside. First of all, there is no financial safety net for you should you fall sick, lose in a fight or just... fall. Although everyone is doing the same work, there is no team and should you fail, they will get your reward for picking up the slack. If you do not work for that day, you will not be punished but you'll have less to eat later on. Still, its a good thing, right? And since the Pandemic, more and more were keen to join you, disregarding the traditional way of studying for Diplomas and/ or Degrees for a more stable position. Lastly, you will not enjoy the benefits of EPF or even SOCSO (but this is being changed).

 By now, you know where I am heading with this.

The Gig Economy

 Yep, there you are, a Gig Worker. No, no, it has nothing to do with Concerts or anything related to it. A Gig Worker is someone who does short-term, flexible jobs be it on a digital platform or, the oft popular opportunities; freelancing and delivery. This breaks the traditional long-term employment with rewards (if you planned) in favour of short-term gains. In short, you are an independent contractor responding to on-demand companies.

 The Gig Economy is a normal part of our daily lives. And we all love to have a package delivered and waiting for us. No more rushing through jams, fighting for a parking spot, ordering and waiting for the food to arrive. Walk under the hot Sun? That was so twenty teens. Now, you can pay someone else to do that all for you and you still have so much time left during that lunch hour.

 Just like a Worker with overtime benefits, the more hours you put in, the more you get paid and that's just about it. But a vertical promotion? Ain't got no time for that since you're too busy making money, right? And this easy peasy this job segment only relies on manpower and the available (legal?) resources that comes with it. It is such an easy Job. A Job that no one can see what the future holds nor how you fare when you have other mouths to feed and also, get older. By this time, will all that ready cash, I'm sure you would have squirreled away some for a rainy day, right? Right? Easy money.

When reality sets in

 There will be a day, when you're too tired, too old and too slow. But you cannot stop. You cannot get your friend/ family to replace you either, even just for a few moments. Unfortunately that day came, and just for that day, you stopped. And every other Gigs you signed up for, also stops. And this is where you need to cash out some of your savings... Let's hope you have savings.

You HAVE savings, right? OK, you can still work

Need instant cash? OK, you can still work

Wife needs money? OK, you can still work

Kids needs more money? OK, you can still work

Family needs more money? OK, you can still work

 Well, since you're still young, why not sign up with other Gig Companies too, as this will make sure you have non-stop orders every moment of the day. And so, everyday, this is your Job. It has turned from, "I'll do this when I have some time to spare" to, "When is the next order?".

Poor fella called me up around half-past ten at night to let me know he has arrived. It was raining, he sounded lost and tired. From the brief convo, I know he's not a regular and only in the evening, did he start working for this gig. So, since it's a pair of safety Shoes, I told him to fling it over the Gate. Didn't realised it rained the whole night and into the morning too. I am not so worried about it getting wet and all, but it would be nice if the seller could have put them inside a box.

 

20251115 Walking through the dark corridor

I can't remember much about this dream but it was frightening and real to me. 

In the beginning, I was exploring a dark corridor by myself and it was a little darker than I expected. So, I went back to my office/ room to gather my wits. Then a female friend came in later and we laid together on the table to rest, with some twisting and turning, she somehow showed me her flat chest. Anyway, with her around, I became braver and we decided to go through the corridor again. It was a long office corridor with high ceiling and both sides had greenish tempered glass. This corridor looked very familiar to another dream I had some time ago. And at the end of that corridor is a darkened shadow. As for the reason why, I am not sure but it felt as if we need to do this.

The corridor opened to a bigger room, which on the right of me were a facade of a coffee shop with tall windows. Inside were empty tables and so, it gave me an ordinary feeling. But then I realized, my Mobile Phone has a mode which view 'special' things. The moment I activated it, from its screen, I can see a lot of 'ghosts'. There were people sitting and drinking at the tables. And then, there is the dark area further up ahead. The normal view shows only a pair of small green doors in the wall, is if it is leading to a celler. But my Phone showed it is full of dark aura, with large spider-like fuzzy soot coming out of it every now and then. I should not open it but I did and all the spider things came out, only to reveal a reddish flowing core.

There were other parts but by the time I rushed for work, the above was the only thing I could remember. The scary part was me walking through the dark corridor alone.

20251112 It was..... Aliens

 20251113

 I was driving along some kind of highway, on a Sunny afternoon, with winding slopes on the right. The Sun was glaring but through my wind screen, there was a long line of cars in front among the sea of yellowish brown.

 I think i must have pulled over at one of the turns where  the hills have recessed shadow. Once I stopped and looked up at the ridge, there were some soldiers with sniper rifles on standby. I climbed up but they were not that bothered with me. While I was looking down at the long line of cars, I noticed they have some kind of potato bread at the side, the kind with burned cheese tops. I ate some abd suddenly, one by one, the soldiers started to turn on their backs, almost screaming in agony while foaming at their mouth before dying. I was worried because I think the bread had something to do with it.

 The next thing I know, I was in front of a brownish house. Inside there were a scene featuring the two guys from Yes, Minister. I was lying on a couch, resting. Then everything shifted to outside, where on a white wall, with one guy crying and sobbing (maybe he is the PM) while the other, who looked like the PM in the TV Show, pushed him to the wall and started scolding hit. Next thing, they were back to the same room with me, which I was still lying on the couch. When the sterner guy talked to me (I thiknk he is really the PM), I noticed though his mouth and into where the throat was, there was some kind of a silver cog wheel with a orange-ish sac in the middle, with red tubes/ veins to the body. I used my finger to poke the sac which then leaked out and he was dead.

 I was in the bathroom, measuring the red scooper which turned out to be 7cm in depth, the same with the others although they looed different in size. 

 I went down where the other staff were, saw a fat guy and pokde my finger into his mouth. There was nothing but his throat. Then saw a Lady Maid, used a chopstick and poke into her mouth and she dies. Somehow, the first guy and I concocted some kind of a white power (salt?) which when we blew onto them, they snorted out the powder and died.

20251108 The oils are... gone!

 Sometimes I can get paranoid when it comes to cars. I have been with VeeChai aka Bengmobile II for close to 14 years and have been very familiar with his quirks. So, any weird sound or changes, can either make me go into inquisitive mode or, well, worry. For example, that 6 six year old occasional front vibrating/ knocking sound? Its now gone, which I attributed to the front bonnet stand lying somewhere on a Malaysian road. I am very certain it is that despite the fact that every time I open the bonnet, it stayed solidly on its holder.

The Engine Oil

 If you were young enough, you would be able to watch how James Bond dispatch the bad guys with an oil slick. In those days, every Bond cars has secret weapons which, by sheer coincidence, came in very handy for 'every' situation. So, everyone, including me, wished our cars has some secret gadget too.

 For those who need to know, mine is the oil slick. Yes, that trailing black oil slick, which, also happens to be uncontrollable (maybe I should have installed a switch?) and sneaky. Sneaky as in, 'How did that happen?' sneaky. Maybe I should call it an oil drip. But anyway, I started to notice Veechai's weird behaviour which seemed to feel lethargic of late and has that occasional clattering/ farting sound.

I beg your pardon?

 Yeah, cars don't usually fart. One thing you should notice when you drive near a wall or a long barricade, they can be a very helpful diagnostic tool. Any sound from the car (apart from the screaming passengers) would be reflected back to you, the driver. This is the opportunity where you can quickly determine if there is a problem. For example, a quick sharp and consistent ticking sound could either be a small stone or, a nail/ screw stuck to the tyre. And, if there is a screeching metallic sound, it could mean you're gluing to the wall, which you can confirm first by looking at the missing side mirror.

Anyway, for my case, the sound is like a fast rattling or a series of non-stop rapid farts. Plus, it only comes up when I least expect it, which is not very helpful when I am on the road. At first, I thought it had something to do with the exhaust and so, I lifted the gas pedal but the sound did not stop. Maybe it's the gearbox because when I set the car to a cruising glide without any load, the sound is occasionally there. Aha! Aaannnnnd...... then it is gone. Only when I press the go-go juice again, it is occasionally there. So, this means, it is from the Engine... shit.

 And. I. Have. Been. Driving. For.... Months!

With the help of the Technicians, we all more or less pin-pointed the loss if engine oil to the faulty oil filter housing, where the oil is trickling down. And when the throttle was pressed, the dripping speeded up. The first thing is to solve this problem before we can confirm if the surrounding oil splatter was from that faulty o-ring of the oil filter housing. Hey, its almost 14 years now. Might also be a good time to really re-seal the oil sump with some gooey stuff.

 

And so, the Sunday is (clockwise from left) Perodua Engine Oil semi-synth 5W-30 RM110.00, Bosch Oil Filter RM8.00, Oil Filter Housing O-Ring RM14.00, Bardalh2 RM22.00 and a pair of Bonnet Rubber RM3.00. Yeah, I forgot the metal oil gasket.

20251102 The Synder Cu...er, Schneider Switch

 It's only after a few months of moving in, we noticed some stuff are starting to break down. Ceilings, lighting, damp walls, rotted grout, leaks and even switches, to name a few. No, it is not the fault of the previous owner/s because to me, these are merely normal wear and tear. It's a matter of time before we start to repair them, budget allowing.

Switch Me On

  One of the most pressing issue would be our Bathroom switch. Both Water Heater and Lights were placed into one 86mm x 85mm Clipsal Switch Panel. And this is one of the range from Schneider Electric. This is not an issue until I realised that cost to replace them and with the same function, is prohibitively expensive.

 One of the models I loved was the Schneider Electric's Avatar On C (must have the 'C') which is like a piano key but stretches all the way to the panel's edges. Unlike their competitors, the small rectangular opening at the bottom does light up. Since the switch is needed to control the Water Heater and the light, I had to get a double-gang version, both with at least 20A capacity. And this is where the price went up. And did I mention that it is 'rare' as well? Rare as in it got 'SOLD OUT' and replacement stock is unknown. If the original wall cavity was constructed to handle two panels instead of one, I would have saved a lot of money by buying tow individual switches. Then again, this would make the whole design looked longer.

Long ago, I promised myself that if I ever did own a house, I would like to have those nice Schneider Switches. I was searching all the over the placed from local to Chinese B2C Platforms, electrical lighting shops and even here, at HomePro.

 

 

 

 

 

And it must be white. So, of all the switches here, the one I wanted is not on display, meaning it was never stocked. The design I want is 7 from the left and two down.

 

 

And the spec is a Double-Gang, 1-way, 20A in White. In the end, I got it for about RM80.00. I showed this to my Wife who responded with a very enthusiastic disinterest, 'meh' look.

 The Installation

 Replacing the switch is a very straight-forward task. Or so I thought. I mean, all I need to do is to remember which wire goes where, remove the old switch, re-wire the new switch and then mount it back. But the sad thing is that the wiring for the old switch is not the same as the new model. But after some time of figuring things out, it got it done. And oh yeah, do tell everyone you're going to shut down the ELCB and the MCBs before you start.. 

 

In less than ten days, the switch has arrived. While I was going over it, my Wife gave me that, "Are you sure you can do this?" look.

The rocking action of the plastic panels do feel nice but I just can't get over the feeling as if the other end of the plastic bounced. The experience is not solid plastic but more of a hollow feel.

 

This is how the 1-way connection worked. The LED would light up when the Live (red wire) and Neutral (Black wire) have power. I was able to do this for the Water Heater (L2, N2 pairs) but for the light, it was a single Live Wire connection so there is no way the LED would light up and I do not want to use the Water Heater's Neutral.

 

 

This is the front of the Avatar On C fascia. Unlike other switches where you need to pry off the bezel of some kind, you only need to remove the switch covers with a solid tug. I know, I know, because looking at where the fulcrum point is, the panel can weaken if I do it too often. Then again, I might want to if I can find some flat weights to stick under these two pieces.

 

This is the interesting part. The light window is diffused and it creates a very soft red light. Because the whole switch assembly is closed up tight, there is no way for me to modify with a white LED. Um, no, forget I mentioned it. Not going to hack a RM80.00 item.

 

Here is a nice surprise! Once the room's lights are off, the small rectangular window also has a brief glow-in-the-dark feature so that you know where the switches are located.

 

Under dim lighting, the red indicator is there but if the room's lights are on, sometimes it is not so noticeable, forcing me having to look at the switch directly instead of a side glance.

20251026 The Elusive PYE Tile grout

 Its been close to one and a half years since we've moved and to be honest, we're still clearing stuff. Almost a year ago, we had been moving our stuff non-stop due to the tight deadline. And even after we hired a skip, there were still more stuff that came out from nowhere. It's amazing how or specifically, me, can amass so much jun... er, physical matter in the span of 30 or more years. On and off, I've been trying to lighten the load but to no avail. Even the great idea off-loading them onto Facebook market was met with a lot of disappointments. But anyway, today's post is not about that. Today's post is about...

Where in the World is The PYE Tile Grout?

I'm not an expert on tiles but common sense tells me that the crevices in between the tiles should not be there.

When it comes to using fillers and stuff for the house, I would always go for the PYE brand. My Dad was using it and so, I had very little reason not to. The ones we had were the normal fillers but just this time, I want the specific product for a very specific issue.

Looking for it was more difficult than I thought. In the beginning, my first stop was Mr. DIY and in most of the target outlets I've gone to, they have all the PYE products except the Tile Grout. The nearby hardware stores surrounding the Office had them but it was in powder form which you need to mix with water. Lastly, I went to HomePro on a fine Sunday only to be met with the same predicament similar to Mr. DIY's. It's like as if the PYE Tile Grout, which comes in a paste, had suddenly became rare. Online, the choices were much better and some even bundled in a grout tool to the point of being sus. Of course the PYE paste was there but it was packaged in a much smaller and I'd still have to mix it with water.

I have given up the search and was about to decide on another brand like Scin-Flex or YTL, anything that does not need me to squeeze stuff out from a bottle like toothpaste. And so, on a fateful day (as in today), I dropped by the Mr. DIY outlet nearest to our house and lo and behold, it was sitting there on the shelf! And the best thing is that it costs only RM8.50 or so.

And it's in white!

 

It's so thoughtful of PYE that their scraper has one nice angle which is ideal to for shaping the fresh grout.

 Note: I always used the Arial font since this was the nicest selection from Blogspot. But today, there is the option to choose better fonts and so, today's font is called Quicksand.

20251008 No more Stress for the Love of my Life

 In our Lives, we will go through a lot of Milestones. And with every event, we are lucky enough to look back and reminisce what has transpired. And I hope, all her Memories would be Joyful (except for my part, which is more on hair-pulling episodes). After more than three decades, she is now literally stress-free and does not have to wake up so damn early in the morning.

 No more cleaning up after my Dad or worry what to cook/ buy for every meal. No more cleaning the big house and going the extra mile for them. No more bearing the brunt of edgy words, knife stares or even be the victim of rumours. No more. I Married her for what she is, a Wife, not a Daily unappreciated Servant.

 This is the time for her to enjoy and do what she wants and I will not stop her. It will be her new Life of Discoveries and Adventure, which in a few more years, I hope to be able to follow...

 

 Oh, did you know about Xiaomi's AI?

 When I got the Xiaomi 14T Pro last year, everyone (OK, the promoters) were harping about its AI capabilities. I didn't pay much attention at that time because I assumed I could use it later. And so, close to its Anniversary, I decided to try it again. The first time was changing the Sky and now, it is about removing people...

OK, this is the first try and I am impressed. Let's go for another one

I need to 'remove' the guy on the right. During the auto selection, the highlighted area also covers the Lady's upper torso in the background. And the result is, we now have a Lady in pink, covering her right with a shawl or something, while holding her handbag and walking away...

 

 

The manual selection only removed his face...

 

After going back to the first image, the second pass of the AI produced the same result but this time, the shadow on the floor improved. This time, we can see the Pink Lady now with some weird black bow tie. Notice her right (or is it left) hand is holding the Mobile Phone as if she is walking towards us.a

 

 

 

 

BUDI95 and the Subsidised Fuel

The Cost of Petrol in Malaysia

When I first started work in the mid-90's, I remember filling up petrol on my Bengmobile at the rate of RM1.10 per litre. All was good but there was one time in the early twenty-teens that due to the World's Oil Crisis, the prince went up as far as RM2.90 per litre. That was a heavy toll for car owners like me since at that time, I was traveling at an average of 100 Km daily. So, paying for fuel at an average of four days can be financially draining.

Since then, the Government has been trying to keep price of fuel down but at the same time, highlighting the cost of maintaining the fuel subsidies. In the meantime, the price is now RM2.05 per litre for RON95. The RON97 also suffered the same fate with its prices fluctuating every now and then and the Diesel was no different which saw its prices go up after the Crisis.

Road vehicles, to us, is really an extension to our legs in terms of our daily life. Without them, we are not able to generate any income. 

Malaysians can get fuel cheaper

 There are a lot of theories and all coupled with illegal siphoning but to me, the main thing was, I am allowed to have a 300L quota at the price of RM1.99 per litre. That is all I needed to hear because, the rest are just noise and does not contribute to my quality of Life or its Future.

 So, with the current Prime Minister Datuk Seri Anwar Ibrahim or better known as PMX (and still maybe, DSAI) tackled this issue after it has been delayed for so long. I'm so jaded with Politics and stuff nowadays that as long as anyone who can deliver a cheaper petrol price I'd vote for them. Simple as that.

 Just as long as I can prove I'm a Malaysian and that is enough for me.

The BUDI95 aka Budi MADANI RON95

 In short, by September 30th, 2025, if you're not Malaysian, you pay for RM2.60 per litre of petrol.

 There. Simple as that. This will solve the majority of the issues. And so, you can use your IC (Identification Card) which is effectively a SmartCard, the Touch n Go App that ties with other Petrol Stations, and the proprietary Petrol Company Apps. 

 With weeks leading to this, most Social Media has instructions showing how they can be used so that when September ends, most of the problems would be eliminated. Except for one thing. Those dumbf@rks never tell you that when you pay in Ringgit, the pump dispenses that equivalent in Litres.In one glance, you'd think you're being overcharged.

 And within days, after many Malaysians went to the pumps (and social media) did someone else clarified the matter. So you'd think those morons who approved and posted the earlier ones are just copypasta people.

Was I charged more?

 On that very first day, it was my turn to try out the BUDI95 scheme...

This was the splash page when I first opened the App.

 

Based on the GPS location from my Mobile Phone, I am at a Caltex Techron Station and so, the Station of choice was available. Then I proceed to specify which pump I'm at. The screen then gives me a QR Code which the Guy at the Counter scans and activates the pump.

I have less than 5 minutes to fuel up. Not.

Heck! I went above RM50.00! Why didn't the pump stop!

Once I am done, the App reflects the transaction data. This is so weird. I should be getting 25.127 litres for my RM50.00

Strange that I still have some balance left from the RM50.00 I transferred earlier.

Seems like I got an RM10.04 back...

I kinda panicked a little when the pump did not stop at the RM50.00, but then, looking at the litres section, it was at 20.08, far short of the 25 or so litres. I surmised it would have stopped at that stage but now, it was too late since I have returned the nozzle. So, I was 'refunded' the RM10.04... sheesh.

20250929 The Ant at the Top of the World

 As the ant climbed to the highest point in my head, where one of my hair sticking out, I flicked it away...

While flying, the Ant must be thinking, "WTF was that?"

20250922 The Storm that I missed

The Trail of Damages in my Wake 

Have you ever experienced the feeling where after you have entered a place and everyone there starts really want to tell you stuff. Stuff that happened on and after your Journey. And those stuff, which you know it was true because, you saw it AFTER it happened and it was about 100 metres away.

Being Uprooted

Case in point was the huge backlog of cars on my way back. There was a big tree which got uprooted by a freak storm and the road was wet. Earlier, I thought nothing of it since those big, thick bolts of lighting were striking away from my destination.

At first, I thought the Silver hatchback (arrow) was crushed

 

 

But it was OK as they could reverse the car out

 

Nearer to my destination, the Restaurant suffered the same. Even their sign board is crooked.

 The Morning After

The funny thing was, it happened while I was away. Almost at the same time, my Wife who was at her School, saw that one of the roof was blown off and on her Journey passing Mid-Valley, she saw the Traffic Cones converging in the middle of the road. And me? I was driving to the Engineering Shop with nothing much exciting apart from the occasional mf who cut into my lane.

But during my Drive back, it was another matter because on my Left, there was thunder and lighting. Usually, these lightning bolts would just light up the sky for a brief instance but here, they lasted for nearly one second and the bolts looked strong.

 

This morning, the same silver hatchback was back again. I guess there is nothing serious, except maybe some cosmetic damage.

 

 

Most of the debris has been cleared so I guess they would be open for business

But hang on, the electrical box has been torn off. And when I passed by their main entrance, it was dark. I just hope that they switched everything off and not suffered any further damages.

 

20250922 PMX announces RON95 to be sold at RM1.99/L

Cheaper RON95?

Click on the Image for the News from www.thevibes.com

Come this end month, there would be some big changes to the Country in terms of Fuel Pricing under the Budi Madani RON95 (aka BUDI95) subsidy scheme. On the 30th September of 2025, we could be paying RM1.99 per litre while non-Citizens would be paying at RM2.60 per litre instead. The only conditions for this to happen would be that you need to present your MyKAD at the counter or at the pump prior to the re-filling and hope that you did not reach your individual monthly quota of 300 Litres.

So, please make sure your MyKAD chips are functional. I do have a MyKAD reader somewhere but after our Move, it's hard to find it back.

 

What does this all mean? 

You can talk all about the Politics or the Conspiracies behind, or how PMX is to you for all I care. Those does not bring food to the table. To me, a reduction of 6 sen per litre means a lot. For a person who travels at least 100Km a day and needs to refill every four days, this is a huge difference. Then again, I am not that person anymore as my daily commute for the moment is never more than 21Km.

 

Let's do some calculations

Looking at the image below, my average fuel consumption is about 11.96 Km/L. (The number 11.95 was a mistake because the formula did not take into account of empty cells.)

With RM50, at the current RM2.05/L, I would have 24.39 litres in the tank and it would give me an average of 300Km. 4 years ago, I would reach the 450Km mark consistently but then again, I was using the Highway and on a 85Km, 3 hour commute. So, with the RM1.99/L, and for the same mount of RM50, I would have a total of 25.13L in the tank. Therefore, if my average fuel consumption is 11.96 Km/L, I would get an additional 8.79Km! Which is a lot and my refueling interval could be a tad longer.

The bad news is, if you're a non-Citizen or your MyKad is faulty or, the readers are on the blink, that's RM2.60 per litre for you. And coming back to my car's calculation, I would have lost close to 62Km for each re-fuel or 5 Litres, depending on which numbers you dislike to see.

I know it's silly to some but I had the bad habit of recording my car's mileage for no reason. And after that, the data is either lost (2020-2022) or jumbled.